Entel HX400 portable two way radio accessories

Technical Services (Shropshire) have a wide variety of Entel radio accessories for you to choose from. We are one of the UK's leading supplier of Entel portable two way radio accessories. To make an enquiry for any product please call 08456 58 58 57.

To download the Entel product brochure please click here.

CARRYING

Entel Carry strapEntel HX Series CFC450 carry strap

CFC450 - Soft leather case with carry strap for the HX series hand portable radio.
A soft lightweight carry case with belt clip available in black. The case comes with a wrist lanyard offering the choice of carrying methods and gives the radio both cosmetic and some impact protection.

Entel CLC450 Heavy duty carry strapentel HX Series CLC452 HEAVY DUTY carry strap

CLC452 – Heavy duty leather case and strap with belt loop for the HX series hand portable radio.
Heavy duty leather carry case with belt loop and strap. This will give the radio cosmetic and maximum impact protection if dropped or knocked.

CHARGERS & BATTERIES

Entel HX Series CSBHX carry strapentel HX Series CSBHX 6-way dual-slot intelligent, rapid charger, 110-230v

CSBHX - Six-unit multi rapid charger for HX series hand portable radio.
This six-unit intelligent rapid mains charger ensures that the batteries only receive the correct amount of charge. Charge status is indicated on each pod via a multi-coloured LED so you will know whether the battery is fully charged before use. The front pocket accommodates the radio complete with attached battery; the rear pocket accommodates the battery only. Charging commences with the front pocket and when the charge is complete it switches to the rear pocket. Charger operates between 110-230V. Due to the high capacity of the HX Li-Ion battery pack, charge time is between 1.5 - 2 hours.

Entel HX series CNB450E rechargeable Lithium-Ion battery pack
Entel HX series CNB450 12v Trickle Charger with cigar lighter lead (takes radio & spare battery)

CNB450E - 7.4v, 1800mAh rechargeable Lithium-Ion battery pack
The CNB450E is an 1800mAh Lithium-Ion lightweight battery pack for the HX series of hand portable radios. The Lithium-Ion technology gives the radio a long operating time and the batteries will not suffer from the ‘memory effect’ that can be experienced on radios using alternative battery chemistries.

Entel HX series CNB450E rechargeable Lithium-Ion battery pack
Entel HX series CNB451E - 7.4v, 2300mAh high capacity rechargeable Lithium-Ion battery pack more

The CNB451E is an 2300mAh Lithium-Ion high capacity battery pack for the HX series of hand portable radios. The Lithium-Ion technology gives the radio a long operating time and the batteries will not suffer from the ‘memory effect’ that can be experienced on radios using alternative battery chemistries.

Entel CMC450E – Single-unit, 12v dual slot rapid charger for the HX series hand portable
Entel HX series CMC450E – Single-unit, 12v dual slot rapid charger for the HX series hand portable

This intelligent rapid mains charger ensures that the battery only receives the correct amount of charge. Charge status is indicated via a multi-coloured LED so you will know whether the battery is fully charged before use. Charger operates between 110-230V. The front pocket accommodates the radio complete with attached battery; the rear pocket accommodates the battery only. Charging commences with the front pocket and when the charge is complete it switches to the rear pocket. Due to the high capacity of the HX Li-Ion battery pack, charge time is between 1.5 - 2 hours.

Entel CSAHX – Single-unit, dual slot rapid charger for the HX series hand portable
Entel HX series CSAHX – Single-unit, dual slot rapid charger for the HX series hand portable

This intelligent rapid mains charger ensures that the battery only receives the correct amount of charge. Charge status is indicated via a multi-coloured LED so you will know whether the battery is fully charged before use. Charger operates between 110-230V. The front pocket accommodates the radio complete with attached battery; the rear pocket accommodates the battery only. Charging commences with the front pocket and when the charge is complete it switches to the rear pocket. Due to the high capacity of the HX Li-Ion battery pack, charge time is between 1.5 - 2 hours.

AUDIO ACCESSORIES

Entel HX Series EHP450 D Shaped earpieceEntel HX Series EHP450 D-shaped earpiece

EHP450 – ‘D’ shaped covert style earpiece for the HX series hand portable radio.
A ‘D’ shaped soft rubber-feel earpiece which fits over your ear. The earpiece is designed to connect into the HX series radio, via the locking accessory connector. (Note: before this accessory can be used, it is necessary for the dealer to enable the listen-only feature in the radio’s programming software). This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

Entel HX Series EA12/450 D shaped earpiece & tie clip microphoneEntel HX Series EA12/450 D-shaped earpiece & TIE CLIP Microphone

EA12/450 – ‘D’ shaped earpiece and tie clip microphone for the HX series hand portable radio.
A ‘D’ shaped, soft rubber-feel earpiece which fits over your ear. This is connected to a combined tie clip microphone and press to talk button via a curly cable. A rotating strain relief clip can attach to your collar to prevent the earpiece being dislodged if the cable were pulled. The EA12/450 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

Entel CMP1/450 – Pocket size lapel speaker microphone for the HX series hand portable radioEntel HX Series CMP1/450 – Pocket size lapel speaker microphone for the HX series hand portable radio

The CMP1/450 is attached with a revolving clip and allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. The CMP1/450 has a socket (3.5mm mono) to allow an optional earpiece (EHP9) for discreet reception of calls. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

Entel HX Series CMP450 - Heavy duty submersible speaker microphoneEntel HX Series CMP450 - Heavy duty submersible speaker microphone

CMP450 - A submersible, very rugged, heavy duty lapel speaker microphone for the HX series hand portable radio. The CMP450 is attached with a revolving clip and allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. The CMP450 has a socket (3.5mm mono) to allow an optional earpiece (EHP9) for discreet reception of calls. Note: When the earpiece is attached the speaker microphone is no longer submersible, until the earpiece is removed and the waterproof cover is replaced and tightened.

EA15/450 – Acoustic tube earpiece and tie clip microphone for HX series hand portable radio.Entel HX Series CMP450 - Heavy duty submersible speaker microphone

A clear acoustic tube earpiece which fits in your ear using the small or large soft pink ear plugs supplied. This is connected to a combined tie clip microphone and press to talk button (PTT).

The EA15/450 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments.

This accessory is particularly suited to covert, security applications. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

Entel EA19/450 – ‘D’ shaped earpiece with boom microphone for the HX series hand portable radio.Entel EA19/450 – ‘D’ shaped earpiece with boom microphone for the HX series hand portable radio

A ‘D’ shaped, soft rubber-feel earpiece which fits over your ear. The earpiece is combined with a lightweight short profile boom microphone. There is an in-line press to talk button (PTT) with clip. The EA19/450 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

MSP01/450 - Full face helmet motor cycle microphone/headset with PTT button for the HX series hand portable radio.

Twin earpiece pads and microphone are secured in the helmet via supplied velcro pads. The water resistant press to talk switch is attached to the handlebar using the velco strap attached to the switch. Both the headset and press to talk switch are connected to the radio using the supplied water resistant quick connect wiring harness. The MSP01/450 is a suitable accessory for any application where a full face helmet is required. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

ENTEL EPT40/450 - Bone conductive earpiece microphone for the HX series hand portable radio.ENTEL EPT40/450 - Bone conductive earpiece microphone for the HX series hand portable radio

The combined microphone/earpiece allows discreet communication with no visible microphone. The earpiece connects via a quality in line connector to a large rugged waterproof press to talk (PTT) button that can clip on to a belt or other suitable position using the rugged revolving clip. The press to talk switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. As with all bone conductive accessories, we do not recommend using voice operated transmit (VOX).

Entel CXR5/450 - Bone conductive skull microphone with in-line PTT for the HX series hand portable radio.Entel CXR5/450 - Bone conductive skull microphone with in-line PTT for the HX series hand portable radio

A high quality rugged bone conductive skull cap. The fully adjustable CXR5 fits on your head similar to a cap. The metal frame supports the bone conductor microphone which fits on adjustable straps and sits on the top of your head.

The adjustable twin earpieces clip into position each side. The robust cable exits the skull cap from the rear and attaches via a quality in-line connector to a large rugged waterproof press to talk switch that can clip on to a belt or other suitable position using the rugged revolving clip. The press to talk switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. As with all bone conductive accessories, we do not recommend using voice operated transmit (VOX).

Entel CXR16/450 – ‘D’ Shaped earpiece, throat microphone with large in-line PTT for the HX series hand portable radio.Entel CXR16/450 – ‘D’ Shaped earpiece, throat microphone with large in-line PTT for the HX series hand portable radio

A high quality throat microphone with a comfortable soft-feel adjustable neck band.

A rugged ‘D’ shaped earpiece accompanies the throat microphone and connects via a quality in-line connector to a large rugged waterproof press to talk switch that can clip on to a belt or other suitable position using the rugged revolving clip.

The large sized press to talk (PTT) switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing.


CHP1/450 - Lightweight single earpiece headset with in-line PTT and VOX for the HX series hand portable radio.CHP1/450 - Lightweight single earpiece headset with in-line PTT and VOX for the HX series hand portable radio

A ‘breeze’ style single earpiece wire-framed headset with boom microphone and wind cover. The headset has an in-line press to talk (PTT) button or the headset can be used with automatic voice activated transmit (when activated on the radio). The CHP1/450 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

ENTEL CHP450HS - Single earpiece ear defender (hard hat use only) with VOX for the HX series hand portable radio.ENTEL CHP450HS - Single earpiece ear defender (hard hat use only) with VOX for the HX series hand portable radio

A heavy duty single ear-cup earpiece with high quality noise-cancelling boom microphone and designed to connect to any safety hard hat via the supplied universal adapter. The headset provides both voice operated transmit (VOX) and a large easy-to-use press to talk button with spring-loaded clip, allowing the radio to be operated using a gloved hand or under clothing. We do stock a small range of common hard hat adapters which can be supplied in place of the universal adapter (please specify at time of ordering).

Entel HX series CHP450HD Double ear-cup ear defender (hard hat use only) with VOX.Entel HX series CHP450HD Double ear-cup ear defender (hard hat use only) with VOX

CHP450HD - Double ear-cup ear defender (hard hat use only) with VOX for the HX series hand portable radio.
A heavy duty ear defender headset with high quality noise-cancelling boom microphone designed to connect to any safety hard hat via the supplied universal adapter. The headset provides both voice operated transmit and a large easy-to-use press to talk button with spring loaded clip, allowing the radio to be operated using a gloved hand or under clothing. We do stock a small range of common hard hat adapters which can be supplied in place of the universal adapter (please specify at time of ordering).

Entel CHP450D - Double ear-cup ear defender with comfort headband and VOX for the HX series hand portable radio.Entel CHP450D - Double ear-cup ear defender with comfort headband and VOX for the HX series hand portable radio

A heavy duty ear defender headset with high quality noise-cancelling boom microphone designed to connect to any safety hard hat via the supplied universal adapter. The headset provides both voice activated transmit and a large easy-to-use press to talk (PTT) button with spring-loaded clip, allowing the radio to be operated using a gloved hand or under clothing. We do stock a small range of common hard hat adapters which can be supplied in place of the universal adapter (please specify at time of ordering).

Entel EHP9 - 'D' shaped covert style earpiece for the HX series hand portable radio.Entel CXR16/450 – ‘D’ Shaped earpiece, throat microphone with large in-line PTT for the HX series hand portable radio

A ‘D’ shaped soft rubber-feel earpiece which fits over your ear. The earpiece is designed to connect into the CMP400 or CMP1/400 lapel speaker microphones.

This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users.

MISCELLANEOUS

CXW400 - Antenna adaptor for external aerial connection
CBH450 - Spare spring loaded belt clip
CAT450V - VHF high-band helical antenna for the HX series hand portable.

A VHF high band antenna for the HX series hand portables. This antenna provides optimum performance with the VHF hand portable transceiver.

CAT450VS - VHF high-band stubby antenna for the HX series hand portable.

A VHF high band antenna for the HX series hand portables. This antenna offers a compact size whilst still delivering good performance.
Note: if the range of your communication system is an important factor, we suggest that you use the full-length antenna for the HX Series.



To enquire about any of the acessories shown please call 08456 58 58 57 - or ask us to Call You Back.

Technical Services (Shropshire) Radio Team